Hunter-fan ARCHITECT 90061 Manual de usuario descargar pdf (Pagina 4)

Pull wires through the strain relief.

A13

Green

Black White

Bare Copper

Ground

A14

Connect wires as shown.

Install the wiring cover plate. Make sure all

wiring connections are inside the box or under

the wiring cover plate.

A15

•

A16

Tighten the wiring cover plate screw.

A17

A18

A20

Reinstall the motor by inserting the tabs and pushing up

into position. Make sure the wires are not pinched

between the motor and the housing.

Secure the motor by tightening the 2 screws.

A21

A22

Test the motor. If the motor does not run, check the plug

connection.

Turn on the power source.

Connect 4” duct and vent to the outside. Tape joints.

If ducting does not fit securely, an adapter may need

to be purchased.

Connect wiring from the motor to the wiring cover plate.

A23

Go to step

on page 17

to attach grille.

A19

41721-01 12/25/2004 41721-01 12/25/2004

1 2 3 4 5 6 7 8 9 10

Sin comentarios

Hunter-fan ARCHITECT 90061 Manual de usuario Pagina 4